ESD5500E - GAC - SPEED CONTROL UNIT - ESD 5500 E

Supply
12 or 24 VDC Battery System (Transient and Reverse Voltage)
 
Polarity
Negative Ground (Case Isolated)
 
Power Consumption
50 ma continuous plus actuator current
 
Actuator Current Range @ 25 Deg. C – (Inductive Load)
Min.2.5 Amps; Max. 10Amps continuous
 
Speed Sensor Signal
0.5-120 Volts RMS
 
Performance
Isochronous Operation/Steady State Stability
±0.25% or better
Speed Range/Governor
1K to 7.5K Hz continuous
Speed Drift with Temperature
±1 Max
Idle Adjust CW
60% of set speed
Idle Adjust CCW
Less than 1200 Hz.
Droop Range
1-5% regulation
Droop Adj. Max. (K-L Jumpered)
400 Hz., ±75Hz. Per 1.0A change
Droop Adj. Min. (K-L Jumpered)
15Hz., ±6Hz. Per 1.0A change
Speed Trim Range
±200 Hz
Remote Variable Speed Range
500 – 7.5 Hz. Or any part there of
Terminal Sensitivity J
100 Hz., ± 15Hz / Volt @ 5.0 K Impedance
Terminal Sensitivity L
735 Hz., ±60 Hz / Volt @ 65 K Impedance
Terminal Sensitivity N
148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance
Terminal Sensitivity P
10 VDC Supply @ 20 ma Max
Environmental
Ambient Operating Temperature Range
-40 to +85 Deg. C
Relative Humidity
Up to 95%
All Surface Finishes
Fungus Proof and Corrosion Resitant
Reliability
Vibration
1G at 20 to 100 Hz.
Testing
100% Functionally Tested
 
 
 
TECHNICAL SPECIFICATIONS of ESD5500/ ESD5500E: 
Isochronous Operation/Steady State Stability 
± 0.25% or better  
 
Speed Range/Governor 
1K-7.5K Hz continuous 
 
Speed Drift with Temperature 
± 1% Maximun 
 
IDLE Adjustment 
160 ± 20Hz ~ 60% of set speed 
 
Droop adjustment Min.(K-L Jumpered) 
15Hz. ± 6Hz. per 1.0 A change  
 
Droop adjustment Max.(K-L Jumpered) 
400Hz. ± 75Hz. per 1.0 A change 
 
Droop Adj. Max. (K-L Jumpered) 
875Hz., ± 75Hz. per 1.0 A change 
 
Droop Adj. Min. (K-L Jumpered) 
15Hz., ± 6Hz. per 1.0 A change 
 
Speed Trim Range 
± 200Hz. 
 
Remote Variable Speed Range 
500 -7.5Hz. or any part thereof 
 
Terminal Sensitivity 
J: 100Hz., ± 15Hz/Volt @ 5.0 K Impedance 
 
L: 735Hz., ± 60Hz/Volt @ 65 K Impedance 
 
N: 148Hz., ± 10Hz/Volt @ 1Meg. Impedance 
 
P: 10V DC Provide @ 20ma Max. 
 
Speed Switch Adjustment Range 
1000-10000Hz. 
 
ENVIRONMENTAL: 
Ambient Operating Temperature Range 
-40°c to +85°c  
 
Relative Humidity 
up to 95% 
 
Storage Temperature 
-55°c ~ 90°c 
 
Shock 
20-100HZ 500mm/Sec. 
 
INPUT POWER: 
Provide 
12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected) 
 
Polarity 
Negative Ground(Case Isolated) 
 
Power Consumption 
50mA continuous plus actuator current 
 
Actuator Current Range @ 25°c-(Inductive Load) 
Min. 2.5 Amps, Max. 10 Amps continuous 
 
Speed Sensor Signal 
0.5-120 V RMS 
 
Speed Switch Relay Contacts(N.O.and N.C.) 
10Amp 
 
PHYSICAL 
Weight 
650g